Merge branch 'rebar' into 3.0.x

with other configure options

.gitignore

@@ -16,23 +16,3 @@
 /doc/*.toc
 /doc/contributed_modules.tex
 /doc/version.tex
-/src/*.beam
-/src/*.so
-/src/*.so.dSYM
-/src/*/*.beam
-/src/*/Makefile
-/src/Makefile
-/src/XmppAddr.asn1db
-/src/XmppAddr.erl
-/src/XmppAddr.hrl
-/src/aclocal.m4
-/src/autom4te.cache
-/src/config.log
-/src/config.status
-/src/ejabberd.init
-/src/ejabberdctl.example
-/src/eldap/ELDAPv3.asn1db
-/src/eldap/ELDAPv3.erl
-/src/eldap/ELDAPv3.hrl
-/src/eldap/eldap_filter_yecc.erl
-/src/epam

Makefile.in

@@ -0,0 +1,238 @@
+REBAR = @REBAR@
+INSTALL = @INSTALL@
+SED = @SED@
+ERL = @ERL@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+DESTDIR =
+
+# /etc/ejabberd/
+ETCDIR = $(DESTDIR)@sysconfdir@/ejabberd
+
+# /sbin/
+SBINDIR = $(DESTDIR)@sbindir@
+
+# /lib/ejabberd/
+EJABBERDDIR = $(DESTDIR)@libdir@/ejabberd
+
+# /share/doc/ejabberd
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+datarootdir = @datarootdir@
+DOCDIR = $(DESTDIR)@docdir@
+
+# /usr/lib/ejabberd/ebin/
+BEAMDIR = $(EJABBERDDIR)/ebin
+
+# /usr/lib/ejabberd/include/
+INCLUDEDIR = $(EJABBERDDIR)/include
+
+# /usr/lib/ejabberd/priv/
+PRIVDIR = $(EJABBERDDIR)/priv
+
+# /usr/lib/ejabberd/priv/bin
+PBINDIR = $(PRIVDIR)/bin
+
+# /usr/lib/ejabberd/priv/lib
+SODIR = $(PRIVDIR)/lib
+
+# /usr/lib/ejabberd/priv/msgs
+MSGSDIR = $(PRIVDIR)/msgs
+
+# /var/lib/ejabberd/
+SPOOLDIR = $(DESTDIR)@localstatedir@/lib/ejabberd
+
+# /var/lock/ejabberdctl
+CTLLOCKDIR = $(DESTDIR)@localstatedir@/lock/ejabberdctl
+
+# /var/lib/ejabberd/.erlang.cookie
+COOKIEFILE = $(SPOOLDIR)/.erlang.cookie
+
+# /var/log/ejabberd/
+LOGDIR = $(DESTDIR)@localstatedir@/log/ejabberd
+
+INSTALLUSER=@INSTALLUSER@
+# if no user was enabled, don't set privileges or ownership
+ifeq ($(INSTALLUSER),)
+  O_USER=
+  G_USER=
+  CHOWN_COMMAND=echo
+  CHOWN_OUTPUT=/dev/null
+  INIT_USER=root
+else
+  O_USER=-o $(INSTALLUSER)
+  G_USER=-g $(INSTALLUSER)
+  CHOWN_COMMAND=chown
+  CHOWN_OUTPUT=&1
+  INIT_USER=$(INSTALLUSER)
+endif
+
+all: deps src
+
+deps:
+	$(REBAR) get-deps
+
+src:
+	$(REBAR) compile
+
+translations:
+	contrib/extract_translations/prepare-translation.sh -updateall
+
+doc:
+	echo making $$target in doc; \
+	(cd doc && $(MAKE) $$target) || exit 1
+
+edoc:
+	$(ERL) -noinput +B -eval \
+        'case edoc:application(ejabberd, ".", []) of ok -> halt(0); error -> halt(1) end.'
+
+install: all
+	#
+	# Configuration files
+	$(INSTALL) -d -m 750 $(G_USER) $(ETCDIR)
+	[ -f $(ETCDIR)/ejabberd.cfg ] \
+		&& $(INSTALL) -b -m 640 $(G_USER) ejabberd.cfg.example $(ETCDIR)/ejabberd.cfg-new \
+		|| $(INSTALL) -b -m 640 $(G_USER) ejabberd.cfg.example $(ETCDIR)/ejabberd.cfg
+	$(SED) -e "s*{{rootdir}}*@prefix@*" \
+		-e "s*{{installuser}}*@INSTALLUSER@*" \
+		-e "s*{{libdir}}*@libdir@*" \
+		-e "s*{{sysconfdir}}*@sysconfdir@*" \
+		-e "s*{{localstatedir}}*@localstatedir@*" \
+		-e "s*{{docdir}}*@docdir@*" \
+		-e "s*{{erl}}*@ERL@*" ejabberdctl.template \
+		> ejabberdctl.example
+	[ -f $(ETCDIR)/ejabberdctl.cfg ] \
+		&& $(INSTALL) -b -m 640 $(G_USER) ejabberdctl.cfg.example $(ETCDIR)/ejabberdctl.cfg-new \
+		|| $(INSTALL) -b -m 640 $(G_USER) ejabberdctl.cfg.example $(ETCDIR)/ejabberdctl.cfg
+	$(INSTALL) -b -m 644 $(G_USER) inetrc $(ETCDIR)/inetrc
+	#
+	# Administration script
+	[ -d $(SBINDIR) ] || $(INSTALL) -d -m 755 $(SBINDIR)
+	$(INSTALL) -m 550 $(G_USER) ejabberdctl.example $(SBINDIR)/ejabberdctl
+	#
+	# Init script
+	$(SED) -e "s*@ctlscriptpath@*$(SBINDIR)*" \
+		-e "s*@installuser@*$(INIT_USER)*" ejabberd.init.template \
+		> ejabberd.init
+	chmod 755 ejabberd.init
+	#
+	# Binary Erlang files
+	$(INSTALL) -d $(BEAMDIR)
+	$(INSTALL) -m 644 ebin/*.app $(BEAMDIR)
+	$(INSTALL) -m 644 ebin/*.beam $(BEAMDIR)
+	$(INSTALL) -m 644 deps/*/ebin/*.app $(BEAMDIR)
+	$(INSTALL) -m 644 deps/*/ebin/*.beam $(BEAMDIR)
+	rm -f $(BEAMDIR)/configure.beam
+	#
+	# ejabberd header files
+	$(INSTALL) -d $(INCLUDEDIR)
+	$(INSTALL) -m 644 include/*.hrl $(INCLUDEDIR)
+	$(INSTALL) -m 644 deps/*/include/*.hrl $(INCLUDEDIR)
+	#
+	# Binary C programs
+	$(INSTALL) -d $(PBINDIR)
+	$(INSTALL) -m 750 $(O_USER) tools/captcha.sh $(PBINDIR)
+	#
+	# Binary system libraries
+	$(INSTALL) -d $(SODIR)
+	#$(INSTALL) -m 644 priv/lib/*.so $(SODIR)
+	$(INSTALL) -m 644 deps/*/priv/lib/*.so $(SODIR)
+	#
+	# Translated strings
+	$(INSTALL) -d $(MSGSDIR)
+	$(INSTALL) -m 644 priv/msgs/*.msg $(MSGSDIR)
+	#
+	# Spool directory
+	$(INSTALL) -d -m 750 $(O_USER) $(SPOOLDIR)
+	$(CHOWN_COMMAND) -R @INSTALLUSER@ $(SPOOLDIR) >$(CHOWN_OUTPUT)
+	chmod -R 750 $(SPOOLDIR)
+	[ ! -f $(COOKIEFILE) ] || { $(CHOWN_COMMAND) @INSTALLUSER@ $(COOKIEFILE) >$(CHOWN_OUTPUT) ; chmod 400 $(COOKIEFILE) ; }
+	#
+	# ejabberdctl lock directory
+	$(INSTALL) -d -m 750 $(O_USER) $(CTLLOCKDIR)
+	$(CHOWN_COMMAND) -R @INSTALLUSER@ $(CTLLOCKDIR) >$(CHOWN_OUTPUT)
+	chmod -R 750 $(CTLLOCKDIR)
+	#
+	# Log directory
+	$(INSTALL) -d -m 750 $(O_USER) $(LOGDIR)
+	$(CHOWN_COMMAND) -R @INSTALLUSER@ $(LOGDIR) >$(CHOWN_OUTPUT)
+	chmod -R 750 $(LOGDIR)
+	#
+	# Documentation
+	$(INSTALL) -d $(DOCDIR)
+	$(INSTALL) -m 644 doc/dev.html $(DOCDIR)
+	$(INSTALL) -m 644 doc/guide.html $(DOCDIR)
+	$(INSTALL) -m 644 doc/*.png $(DOCDIR)
+	$(INSTALL) -m 644 doc/*.txt $(DOCDIR)
+	[ -f doc/guide.pdf ] \
+		&& $(INSTALL) -m 644 doc/guide.pdf $(DOCDIR) \
+		|| echo "No doc/guide.pdf was built"
+	$(INSTALL) -m 644 COPYING $(DOCDIR)
+
+uninstall: uninstall-binary
+
+uninstall-binary:
+	rm -f  $(SBINDIR)/ejabberdctl
+	rm -fr $(DOCDIR)
+	rm -f  $(BEAMDIR)/*.beam
+	rm -f  $(BEAMDIR)/*.app
+	rm -fr $(BEAMDIR)
+	rm -f  $(INCLUDEDIR)/*.hrl
+	rm -fr $(INCLUDEDIR)
+	rm -fr $(PBINDIR)
+	rm -f  $(SODIR)/*.so
+	rm -fr $(SODIR)
+	rm -f  $(MSGSDIR)/*.msgs
+	rm -fr $(MSGSDIR)
+	rm -fr $(PRIVDIR)
+	rm -fr $(EJABBERDDIR)
+
+uninstall-all: uninstall-binary
+	rm -rf $(ETCDIR)
+	rm -rf $(EJABBERDDIR)
+	rm -rf $(SPOOLDIR)
+	rm -rf $(CTLLOCKDIR)
+	rm -rf $(LOGDIR)
+
+clean:
+	$(REBAR) clean
+
+clean-rel:
+	rm -rf rel/ejabberd
+
+distclean: clean clean-rel
+	rm -f config.status
+	rm -f config.log
+	rm -rf autom4te.cache
+	rm -rf deps
+	rm -rf ebin
+	rm -f Makefile
+	rm -f vars.config
+	rm -f src/ejabberd.app.src
+	[ ! -f ../ChangeLog ] || rm -f ../ChangeLog
+
+rel: all
+	$(REBAR) generate
+
+TAGS:
+	etags *.erl
+
+Makefile: Makefile.in
+
+deps := $(filter-out deps/riak_pb/ebin, $(wildcard deps/*/ebin))
+
+erlang.plt:
+	-dialyzer --build_plt --output_plt erlang.plt \
+	--apps kernel stdlib sasl crypto public_key ssl mnesia \
+	inets odbc tools compiler erts webtool runtime_tools asn1 \
+	observer xmerl et gs wx syntax_tools $(deps)
+
+plt: erlang.plt
+
+dialyzer: plt
+	-dialyzer --plt erlang.plt --add_to_plt --output_plt ejabberd.plt \
+	--get_warnings -o dialyzer.log ebin
+
+.PHONY: src doc edoc dialyzer Makefile TAGS clean clean-rel distclean rel plt \
+	install uninstall uninstall-binary uninstall-all translations

README

@@ -14,8 +14,6 @@ To compile ejabberd you need:
  - OpenSSL 0.9.8 or higher, for STARTTLS, SASL and SSL encryption.
  - Zlib 1.2.3 or higher, for Stream Compression support
    (XEP-0138). Optional.
- - Erlang mysql library. Optional. MySQL authentication/storage.
- - Erlang pgsql library. Optional. PostgreSQL authentication/storage.
  - PAM library. Optional. For Pluggable Authentication Modules (PAM).
  - GNU Iconv 1.8 or higher, for the IRC Transport
    (mod_irc). Optional. Not needed on systems with GNU Libc.
@@ -25,7 +23,7 @@ To compile ejabberd you need:
 
 1. Compile and install on *nix systems
 
-To compile ejabberd, go to the directory src/ and execute the commands:
+To compile ejabberd execute the commands:
   ./configure
   make
 

configure.ac

@@ -0,0 +1,266 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.53)
+AC_PACKAGE_VERSION(3.0.0)
+AC_INIT(ejabberd, 3.0.0, [ejabberd@process-one.net], [ejabberd])
+
+# Checks for programs.
+AC_PROG_MAKE_SET
+AC_PROG_INSTALL
+AC_PROG_SED
+
+if test "x$GCC" = "xyes"; then
+    CFLAGS="$CFLAGS -Wall"
+fi
+
+# Checks Erlang runtime and compiler
+AC_ERLANG_NEED_ERL
+AC_ERLANG_NEED_ERLC
+
+# Checks and sets ERLANG_ROOT_DIR and ERLANG_LIB_DIR variable
+# AC_ERLANG_SUBST_ROOT_DIR
+# AC_ERLANG_SUBST_LIB_DIR
+
+#locating escript
+AC_PATH_PROG([ESCRIPT], [escript], [])
+
+#locating rebar
+AC_PATH_PROG([REBAR], [rebar], [./rebar])
+
+#locating make
+AC_CHECK_PROG([MAKE], [make], [make], [])
+
+if test "x$ESCRIPT" = "x"; then
+   AC_MSG_ERROR(['escript' was not found])
+fi
+
+if test "x$MAKE" = "x"; then
+   AC_MSG_ERROR(['make' was not found])
+fi
+
+# Change default prefix
+AC_PREFIX_DEFAULT(/)
+
+AC_ARG_ENABLE(hipe,
+[AC_HELP_STRING([--enable-hipe], [compile natively with HiPE, not recommended (default: no)])],
+[case "${enableval}" in
+  yes) hipe=true ;;
+  no)  hipe=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-hipe) ;;
+esac],[hipe=false])
+
+AC_ARG_ENABLE(roster_gateway_workaround,
+[AC_HELP_STRING([--enable-roster-gateway-workaround], [turn on workaround for processing gateway subscriptions (default: no)])],
+[case "${enableval}" in
+  yes) roster_gateway_workaround=true ;;
+  no)  roster_gateway_workaround=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-roster-gateway-workaround) ;;
+esac],[roster_gateway_workaround=false])
+
+AC_ARG_ENABLE(flash_hack,
+[AC_HELP_STRING([--enable-flash-hack], [support Adobe Flash client XML (default: no)])],
+[case "${enableval}" in
+  yes) flash_hack=true ;;
+  no)  flash_hack=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-flash-hack) ;;
+esac],[flash_hack=false])
+
+AC_ARG_ENABLE(transient_supervisors,
+[AC_HELP_STRING([--enable-transient_supervisors], [use Erlang supervision for transient process (default: no)])],
+[case "${enableval}" in
+  yes) transient_supervisors=true ;;
+  no)  transient_supervisors=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-transient_supervisors) ;;
+esac],[transient_supervisors=false])
+
+AC_ARG_ENABLE(full_xml,
+[AC_HELP_STRING([--enable-full-xml], [use XML features in XMPP stream (ex: CDATA) (default: no, requires XML compliant clients)])],
+[case "${enableval}" in
+  yes) full_xml=true ;;
+  no)  full_xml=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-full-xml) ;;
+esac],[full_xml=false])
+
+AC_ARG_ENABLE(mssql,
+[AC_HELP_STRING([--enable-mssql], [use Microsoft SQL Server database (default: no, requires --enable-odbc)])],
+[case "${enableval}" in
+  yes) db_type=mssql ;;
+  no)  db_type=generic ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-mssql) ;;
+esac],[db_type=generic])
+
+AC_ARG_ENABLE(tools,
+[AC_HELP_STRING([--enable-tools], [build development tools (currently the ejabberd profiler only, default: no)])],
+[case "${enableval}" in
+  yes) tools=true ;;
+  no)  tools=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-tools) ;;
+esac],[tools=false])
+
+AC_ARG_ENABLE(all,
+[AC_HELP_STRING([--enable-all], [same as --enable-nif --enable-mysql --enable-pgsql --enable-pam --enable-zlib --enable-stun --enable-riak --enable-json --enable-iconv --enable-debug --enable-pubsub-ng --enable-http (useful for Dialyzer checks, default: no)])],
+[case "${enableval}" in
+  yes) nif=true mysql=true pgsql=true pam=true zlib=true stun=true riak=true json=true iconv=true debug=true pubsub_ng=true http=true ;;
+  no) nif=false mysql=false pgsql=false pam=false zlib=false stun=false riak=false json=false iconv=false debug=false pubsub_ng=false http=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-all) ;;
+esac],[])
+
+AC_ARG_ENABLE(nif,
+[AC_HELP_STRING([--enable-nif], [replace some functions with C equivalents. Requires Erlang R13B04 or higher (default: no)])],
+[case "${enableval}" in
+  yes) nif=true ;;
+  no)  nif=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-nif) ;;
+esac],[if test "x$nif" = "x"; then nif=false; fi])
+
+AC_ARG_ENABLE(mysql,
+[AC_HELP_STRING([--enable-mysql], [enable MySQL support (default: no)])],
+[case "${enableval}" in
+  yes) mysql=true ;;
+  no)  mysql=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-mysql) ;;
+esac],[if test "x$mysql" = "x"; then mysql=false; fi])
+
+AC_ARG_ENABLE(pgsql,
+[AC_HELP_STRING([--enable-pgsql], [enable PostgreSQL support (default: no)])],
+[case "${enableval}" in
+  yes) pgsql=true ;;
+  no)  pgsql=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-pgsql) ;;
+esac],[if test "x$pgsql" = "x"; then pgsql=false; fi])
+
+AC_ARG_ENABLE(pam,
+[AC_HELP_STRING([--enable-pam], [enable PAM support (default: no)])],
+[case "${enableval}" in
+  yes) pam=true ;;
+  no)  pam=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-pam) ;;
+esac],[if test "x$pam" = "x"; then pam=false; fi])
+
+AC_ARG_ENABLE(zlib,
+[AC_HELP_STRING([--enable-zlib], [enable Stream Compression (XEP-0138) using zlib (default: yes)])],
+[case "${enableval}" in
+  yes) zlib=true ;;
+  no)  zlib=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-zlib) ;;
+esac],[if test "x$zlib" = "x"; then zlib=true; fi])
+
+AC_ARG_ENABLE(stun,
+[AC_HELP_STRING([--enable-stun], [enable STUN support (default: no)])],
+[case "${enableval}" in
+  yes) stun=true ;;
+  no)  stun=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-stun) ;;
+esac],[if test "x$stun" = "x"; then stun=false; fi])
+
+AC_ARG_ENABLE(riak,
+[AC_HELP_STRING([--enable-riak], [enable Riak support (default: no)])],
+[case "${enableval}" in
+  yes) riak=true ;;
+  no)  riak=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-riak) ;;
+esac],[if test "x$riak" = "x"; then riak=false; fi])
+
+AC_ARG_ENABLE(json,
+[AC_HELP_STRING([--enable-json], [enable JSON support for mod_bosh (default: no)])],
+[case "${enableval}" in
+  yes) json=true ;;
+  no)  json=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-json) ;;
+esac],[if test "x$json" = "x"; then json=false; fi])
+
+AC_ARG_ENABLE(iconv,
+[AC_HELP_STRING([--enable-iconv], [enable iconv support (default: yes)])],
+[case "${enableval}" in
+  yes) iconv=true ;;
+  no)  iconv=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-iconv) ;;
+esac],[if test "x$iconv" = "x"; then iconv=true; fi])
+
+AC_ARG_ENABLE(debug,
+[AC_HELP_STRING([--enable-debug], [enable debug information (default: yes)])],
+[case "${enableval}" in
+  yes) debug=true ;;
+  no)  debug=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
+esac],[if test "x$debug" = "x"; then debug=true; fi])
+
+AC_ARG_ENABLE(pubsub_ng,
+[AC_HELP_STRING([--enable-pubsub-ng], [enable PubSub NG (default: no)])],
+[case "${enableval}" in
+  yes) pubsub_ng=true ;;
+  no)  pubsub_ng=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-pubsub-ng) ;;
+esac],[if test "x$pubsub_ng" = "x"; then pubsub_ng=false; fi])
+
+AC_ARG_ENABLE(http,
+[AC_HELP_STRING([--enable-http], [build external HTTP libraries ('ibrowse' and 'lhttpc', default: no)])],
+[case "${enableval}" in
+  yes) http=true ;;
+  no)  http=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-http) ;;
+esac],[if test "x$http" = "x"; then http=false; fi])
+
+AC_CONFIG_FILES([Makefile
+		 vars.config
+		 src/ejabberd.app.src])
+
+ENABLEUSER=""
+AC_ARG_ENABLE(user,
+  [AS_HELP_STRING([--enable-user[[[[=USER]]]]], [allow this system user to start ejabberd (default: no)])],
+  [case "${enableval}" in
+     yes) ENABLEUSER=`whoami` ;;
+     no) ENABLEUSER="" ;;
+     *) ENABLEUSER=$enableval
+   esac],
+  [])
+if test "$ENABLEUSER" != ""; then
+  echo "allow this system user to start ejabberd: $ENABLEUSER"
+  AC_SUBST([INSTALLUSER], [$ENABLEUSER])
+fi
+
+AC_ERLANG_CHECK_LIB([sasl], [],
+    [AC_MSG_ERROR([Erlang application 'sasl' was not found])])
+AC_ERLANG_CHECK_LIB([crypto], [],
+    [AC_MSG_ERROR([Erlang application 'crypto' was not found])])
+AC_ERLANG_CHECK_LIB([public_key], [],
+    [AC_MSG_ERROR([Erlang application 'public_key' was not found])])
+AC_ERLANG_CHECK_LIB([ssl], [],
+    [AC_MSG_ERROR([Erlang application 'ssl' was not found])])
+AC_ERLANG_CHECK_LIB([mnesia], [],
+    [AC_MSG_ERROR([Erlang application 'mnesia' was not found])])
+AC_ERLANG_CHECK_LIB([inets], [],
+    [AC_MSG_ERROR([Erlang application 'inets' was not found])])
+AC_ERLANG_CHECK_LIB([odbc], [],
+    [AC_MSG_ERROR([Erlang application 'odbc' was not found])])
+AC_ERLANG_CHECK_LIB([compiler], [],
+    [AC_MSG_ERROR([Erlang application 'compiler' was not found])])
+if test "x$tools" = "xtrue"; then
+   AC_ERLANG_CHECK_LIB([tools], [],
+      [AC_MSG_ERROR([Erlang application 'tools' was not found])])
+   AC_ERLANG_CHECK_LIB([runtime_tools], [],
+      [AC_MSG_ERROR([Erlang application 'runtime_tools' was not found])])
+fi
+
+AC_SUBST(hipe)
+AC_SUBST(roster_gateway_workaround)
+AC_SUBST(flash_hack)
+AC_SUBST(transient_supervisors)
+AC_SUBST(full_xml)
+AC_SUBST(nif)
+AC_SUBST(db_type)
+AC_SUBST(mysql)
+AC_SUBST(pgsql)
+AC_SUBST(pam)
+AC_SUBST(zlib)
+AC_SUBST(stun)
+AC_SUBST(riak)
+AC_SUBST(json)
+AC_SUBST(iconv)
+AC_SUBST(debug)
+AC_SUBST(pubsub_ng)
+AC_SUBST(http)
+AC_SUBST(tools)
+
+AC_OUTPUT

contrib/extract_translations/prepare-translation.sh

@@ -15,13 +15,13 @@ prepare_dirs ()
 	ERL=`which erl`
 
 	EJA_SRC_DIR=$EJA_DIR/src/
-	EJA_MSGS_DIR=$EJA_SRC_DIR/msgs/
+	EJA_MSGS_DIR=$EJA_DIR/priv/msgs/
 	EXTRACT_DIR=$EJA_DIR/contrib/extract_translations/
 	EXTRACT_ERL=$EXTRACT_DIR/extract_translations.erl
 	EXTRACT_BEAM=$EXTRACT_DIR/extract_translations.beam
 
 	SRC_DIR=$RUN_DIR/src
-	MSGS_DIR=$SRC_DIR/msgs
+	MSGS_DIR=$EJA_DIR/priv/msgs
 
 	if !([[ -n $EJA_DIR ]])
 	then 
@@ -288,8 +288,8 @@ translation_instructions ()
 	echo "  $MSGS_PATH"
 }
 
-EJA_DIR=`pwd`/..
-RUN_DIR=`pwd`/..
+EJA_DIR=`pwd`
+RUN_DIR=`pwd`
 PROJECT=ejabberd
 
 while [ $# -ne 0 ] ; do

doc/guide.tex

@@ -386,10 +386,34 @@ Some options that you may be interested in modifying:
 	\titem{--enable-pam}
 	Enable the PAM authentication method (see section \ref{pam}).
 
-	\titem{--enable-odbc or --enable-mssql}
+	\titem{--enable-mssql}
 	Required if you want to use an external database.
 	See section~\ref{database} for more information.
 
+        \titem{--enable-tools}
+        Enable the use of development tools.
+
+        \titem{--enable-mysql}
+        Enable MySQL support (see section \ref{mysql}).
+
+        \titem{--enable-pgsql}
+        Enable PostgreSQL support (see section \ref{pgsql}).
+
+        \titem{--enable-zlib}
+        Enable Stream Compression (XEP-0138) using zlib.
+
+        \titem{--enable-stun}
+        Enable STUN support (see section \ref{stun}).
+
+        \titem{--enable-riak}
+        Enable Riak support.
+
+        \titem{--enable-iconv}
+        Enable iconv support. This is needed for \term{mod\_irc} (see seciont \ref{modirc}).
+
+        \titem{--enable-debug}
+        Compile with \term{+debug\_info} enabled.
+
 	\titem{--enable-full-xml}
 	Enable the use of XML based optimisations.
 	It will for example use CDATA to escape characters in the XMPP stream.
@@ -1257,6 +1281,7 @@ The following authentication methods are supported by \ejabberd{}:
   \ref{mssql} and \ref{odbc}.
 \item anonymous --- See section~\ref{saslanonymous}.
 \item pam --- See section~\ref{pam}.
+\item riak --- See section~\ref{riak}.
 \end{itemize}
 
 Account creation is only supported by internal, external and odbc methods.
@@ -1972,14 +1997,8 @@ For example:
 \makesubsection{mysql}{MySQL}
 \ind{MySQL}\ind{MySQL!schema}
 
-Although this section will describe \ejabberd{}'s configuration when you want to
-use the native MySQL driver, it does not describe MySQL's installation and
-database creation. Check the MySQL documentation and the tutorial \footahref{http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver}{Using ejabberd with MySQL native driver} for information regarding these topics.
-Note that the tutorial contains information about \ejabberd{}'s configuration
-which is duplicate to this section.
-
-Moreover, the file mysql.sql in the directory src/odbc might be interesting for
-you. This file contains the \ejabberd{} schema for MySQL. At the end of the file
+There is a file \term{mysql.sql} in the directory \term{odbc}.
+This file contains the \ejabberd{} schema for MySQL. At the end of the file
 you can find information to update your database schema.
 
 
@@ -1987,19 +2006,13 @@ you can find information to update your database schema.
 \ind{MySQL!Driver Compilation}
 
 You can skip this step if you installed \ejabberd{} using a binary installer or
-if the binary packages of \ejabberd{} you are using include support for MySQL.
+if the binary packages of \ejabberd{} you are using include support for ODBC.
 
-\begin{enumerate}
-\item First, install the \footahref{http://support.process-one.net/doc/display/CONTRIBS/Yxa}{Erlang
-  MySQL library}. Make sure the compiled files are in your Erlang path; you can
-  put them for example in the same directory as your \ejabberd{} .beam files.
-\item Then, configure and install \ejabberd{} with ODBC support enabled (this is
-  also needed for native MySQL support!). This can be done, by using next
-  commands:
+Use \term{--enable-mysql} configure option in order to build \ejabberd{} with
+MySQL support:
 \begin{verbatim}
-./configure --enable-odbc && make install
+./configure --enable-mysql && make install
 \end{verbatim}
-\end{enumerate}
 
 
 \makesubsubsection{configuremysql}{Database Connection}
@@ -2072,16 +2085,9 @@ that you cannot have several variants of the same module loaded!
 \makesubsection{mssql}{Microsoft SQL Server}
 \ind{Microsoft SQL Server}\ind{Microsoft SQL Server!schema}
 
-Although this section will describe \ejabberd{}'s configuration when you want to
-use Microsoft SQL Server, it does not describe Microsoft SQL Server's
-installation and database creation. Check the MySQL documentation and the
-tutorial \footahref{http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver}{Using ejabberd with MySQL native driver} for information regarding these topics.
-Note that the tutorial contains information about \ejabberd{}'s configuration
-which is duplicate to this section.
-
-Moreover, the file mssql.sql in the directory src/odbc might be interesting for
-you. This file contains the \ejabberd{} schema for Microsoft SQL Server. At the end
-of the file you can find information to update your database schema.
+There is a file \term{mssql.sql} in the directory \term{odbc}.
+This file contains the \ejabberd{} schema for Microsoft SQL Server. At the end of the file
+you can find information to update your database schema.
 
 
 \makesubsubsection{compilemssql}{Driver Compilation}
@@ -2090,11 +2096,10 @@ of the file you can find information to update your database schema.
 You can skip this step if you installed \ejabberd{} using a binary installer or
 if the binary packages of \ejabberd{} you are using include support for ODBC.
 
-If you want to use Microsoft SQL Server with ODBC, you need to configure,
-compile and install \ejabberd{} with support for ODBC and Microsoft SQL Server
-enabled. This can be done, by using next commands:
+Use \term{--enable-mssql} configure option in order to build \ejabberd{} with
+Microsoft SQL Server support:
 \begin{verbatim}
-./configure --enable-odbc --enable-mssql && make install
+./configure --enable-mssql && make install
 \end{verbatim}
 
 
@@ -2139,13 +2144,7 @@ module loaded!
 \makesubsection{pgsql}{PostgreSQL}
 \ind{PostgreSQL}\ind{PostgreSQL!schema}
 
-Although this section will describe \ejabberd{}'s configuration when you want to
-use the native PostgreSQL driver, it does not describe PostgreSQL's installation
-and database creation. Check the PostgreSQL documentation and the tutorial \footahref{http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver}{Using ejabberd with MySQL native driver} for information regarding these topics.
-Note that the tutorial contains information about \ejabberd{}'s configuration
-which is duplicate to this section.
-
-Also the file pg.sql in the directory src/odbc might be interesting for you.
+There is a file \term{pg.sql} in the directory \term{odbc}.
 This file contains the \ejabberd{} schema for PostgreSQL. At the end of the file
 you can find information to update your database schema.
 
@@ -2157,19 +2156,11 @@ You can skip this step if you installed \ejabberd{} using a binary installer or
 if the binary packages of \ejabberd{} you are using include support for
 PostgreSQL.
 
-\begin{enumerate}
-\item First, install the Erlang pgsql library from
-  \footahref{http://www.ejabberd.im/ejabberd-modules/}{ejabberd-modules SVN repository}.
-  Make sure the compiled
-  files are in your Erlang path; you can put them for example in the same
-  directory as your \ejabberd{} .beam files.
-\item Then, configure, compile and install \ejabberd{} with ODBC support enabled
-  (this is also needed for native PostgreSQL support!). This can be done, by
-  using next commands:
+Use \term{--enable-pgsql} configure option in order to build \ejabberd{} with
+PostgreSQL support:
 \begin{verbatim}
-./configure --enable-odbc && make install
+./configure --enable-pgsql && make install
 \end{verbatim}
-\end{enumerate}
 
 
 \makesubsubsection{configurepgsql}{Database Connection}
@@ -2236,31 +2227,6 @@ Keep in mind that you cannot have several variants of the same module loaded!
 \makesubsection{odbc}{ODBC Compatible}
 \ind{databases!ODBC}
 
-Although this section will describe \ejabberd{}'s configuration when you want to
-use the ODBC driver, it does not describe the installation and database creation
-of your database. Check the documentation of your database. The tutorial \footahref{http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver}{Using ejabberd with MySQL native driver} also can help you. Note that the tutorial
-contains information about \ejabberd{}'s configuration which is duplicate to
-this section.
-
-
-\makesubsubsection{compileodbc}{Driver Compilation}
-
-You can skip this step if you installed \ejabberd{} using a binary installer or
-if the binary packages of \ejabberd{} you are using include support for
-ODBC.
-
-\begin{enumerate}
-\item First, install the \footahref{http://support.process-one.net/doc/display/CONTRIBS/Yxa}{Erlang
-  MySQL library}. Make sure the compiled files are in your Erlang path; you can
-  put them for example in the same directory as your \ejabberd{} .beam files.
-\item Then, configure, compile and install \ejabberd{} with ODBC support
-  enabled. This can be done, by using next commands:
-\begin{verbatim}
-./configure --enable-odbc && make install
-\end{verbatim}
-\end{enumerate}
-
-
 \makesubsubsection{configureodbc}{Database Connection}
 \ind{ODBC!Database Connection}
 

ejabberdctl.template

@@ -7,12 +7,14 @@ ERL_MAX_PORTS=32000
 ERL_PROCESSES=250000
 ERL_MAX_ETS_TABLES=1400
 
+SCRIPT_DIR=$(cd ${0%/*} && pwd)
+
 # define default environment variables
 NODE=ejabberd
 HOST=localhost
 ERLANG_NODE=$NODE@$HOST
-ERL=@erl@
-INSTALLUSER=@installuser@
+ERL={{erl}}
+INSTALLUSER={{installuser}}
 
 # parse command line parameters
 ARGS=
@@ -33,7 +35,7 @@ done
 
 # Define ejabberd variable if they have not been defined from the command line
 if [ "$ETCDIR" = "" ] ; then
-    ETCDIR=@SYSCONFDIR@/ejabberd
+    ETCDIR={{sysconfdir}}/ejabberd
 fi
 if [ "$EJABBERD_CONFIG_PATH" = "" ] ; then
     EJABBERD_CONFIG_PATH=$ETCDIR/ejabberd.cfg
@@ -45,13 +47,13 @@ if [ -f "$EJABBERDCTL_CONFIG_PATH" ] ; then
     . "$EJABBERDCTL_CONFIG_PATH"
 fi
 if [ "$LOGS_DIR" = "" ] ; then
-    LOGS_DIR=@LOCALSTATEDIR@/log/ejabberd
+    LOGS_DIR={{localstatedir}}/log/ejabberd
 fi
 if [ "$SPOOLDIR" = "" ] ; then
-    SPOOLDIR=@LOCALSTATEDIR@/lib/ejabberd
+    SPOOLDIR={{localstatedir}}/lib/ejabberd
 fi
 if [ "$EJABBERD_DOC_PATH" = "" ] ; then
-    EJABBERD_DOC_PATH=@DOCDIR@
+    EJABBERD_DOC_PATH={{docdir}}
 fi
 if [ "$ERLANG_NODE_ARG" != "" ] ; then
     ERLANG_NODE=$ERLANG_NODE_ARG
@@ -92,23 +94,25 @@ fi
 ERLANG_OPTS="+K $POLL -smp $SMP +P $ERL_PROCESSES $ERL_OPTIONS"
 
 # define additional environment variables
-if [ "$EJABBERDDIR" = "" ] ; then
-    EJABBERDDIR=@LIBDIR@/ejabberd
-fi
-if [ "$EJABBERD_EBIN_PATH" = "" ] ; then
-    EJABBERD_EBIN_PATH=$EJABBERDDIR/ebin
-fi
-if [ "$EJABBERD_PRIV_PATH" = "" ] ; then
-    EJABBERD_PRIV_PATH=$EJABBERDDIR/priv
-fi
-if [ "$EJABBERD_BIN_PATH" = "" ] ; then
-    EJABBERD_BIN_PATH=$EJABBERD_PRIV_PATH/bin
-fi
-if [ "$EJABBERD_SO_PATH" = "" ] ; then
-    EJABBERD_SO_PATH=$EJABBERD_PRIV_PATH/lib
-fi
-if [ "$EJABBERD_MSGS_PATH" = "" ] ; then
-    EJABBERD_MSGS_PATH=$EJABBERD_PRIV_PATH/msgs
+if [ "{{release}}" != "true" ] ; then
+    if [ "$EJABBERDDIR" = "" ] ; then
+	EJABBERDDIR={{libdir}}/ejabberd
+    fi
+    if [ "$EJABBERD_EBIN_PATH" = "" ] ; then
+	EJABBERD_EBIN_PATH=$EJABBERDDIR/ebin
+    fi
+    if [ "$EJABBERD_PRIV_PATH" = "" ] ; then
+	EJABBERD_PRIV_PATH=$EJABBERDDIR/priv
+    fi
+    if [ "$EJABBERD_BIN_PATH" = "" ] ; then
+	EJABBERD_BIN_PATH=$EJABBERD_PRIV_PATH/bin
+    fi
+    if [ "$EJABBERD_SO_PATH" = "" ] ; then
+	EJABBERD_SO_PATH=$EJABBERD_PRIV_PATH/lib
+    fi
+    if [ "$EJABBERD_MSGS_PATH" = "" ] ; then
+	EJABBERD_MSGS_PATH=$EJABBERD_PRIV_PATH/msgs
+    fi
 fi
 
 EJABBERD_LOG_PATH=$LOGS_DIR/ejabberd.log
@@ -258,7 +262,7 @@ ctl ()
     # using flock if available. Expects a linux-style
     # flock that can lock a file descriptor.
     MAXCONNID=100
-    CONNLOCKDIR=@LOCALSTATEDIR@/lock/ejabberdctl
+    CONNLOCKDIR={{localstatedir}}/lock/ejabberdctl
     FLOCK='/usr/bin/flock'
     if [ ! -x "$FLOCK" ] || [ ! -d "$CONNLOCKDIR" ] ; then
         JOT='/usr/bin/jot'

include/ejabberd.hrl

@@ -27,7 +27,7 @@
 
 -define(MYLANG, ejabberd_config:get_mylang()).
 
--define(MSGS_DIR, <<"msgs">>).
+-define(MSGS_DIR, filename:join(["priv", "msgs"])).
 
 -define(CONFIG_PATH, <<"ejabberd.cfg">>).
 
@@ -59,27 +59,3 @@
 -type scram() :: #scram{}.
 
 -define(SCRAM_DEFAULT_ITERATION_COUNT, 4096).
-
-%% ---------------------------------
-%% Logging mechanism
-
--define(PRINT(Format, Args), io:format(Format, Args)).
-
--define(DEBUG(Format, Args),
-	ejabberd_logger:debug_msg(?MODULE, ?LINE, Format,
-				  Args)).
-
--define(INFO_MSG(Format, Args),
-	ejabberd_logger:info_msg(?MODULE, ?LINE, Format, Args)).
-
--define(WARNING_MSG(Format, Args),
-	ejabberd_logger:warning_msg(?MODULE, ?LINE, Format,
-				    Args)).
-
--define(ERROR_MSG(Format, Args),
-	ejabberd_logger:error_msg(?MODULE, ?LINE, Format,
-				  Args)).
-
--define(CRITICAL_MSG(Format, Args),
-	ejabberd_logger:critical_msg(?MODULE, ?LINE, Format,
-				     Args)).

include/jlib.hrl

@@ -215,6 +215,8 @@
 
 -define(NS_BOB, <<"urn:xmpp:bob">>).
 
+-include("xml.hrl").
+
 -define(STANZA_ERROR(Code, Type, Condition),
 	#xmlel{name = <<"error">>,
 	       attrs = [{<<"code">>, Code}, {<<"type">>, Type}],
@@ -617,19 +619,6 @@
 
 -type(ljid() :: {binary(), binary(), binary()}).
 
--record(xmlel,
-{
-    name = <<"">> :: binary(),
-    attrs    = [] :: [attr()],
-    children = [] :: [xmlel() | cdata()]
-}).
-
--type(cdata() :: {xmlcdata, CData::binary()}).
-
--type(attr() :: {Name::binary(), Value::binary()}).
-
--type(xmlel() :: #xmlel{}).
-
 -record(iq, {id = <<"">>       :: binary(),
              type = get        :: get | set | result | error,
              xmlns = <<"">>    :: binary(),

include/logger.hrl

@@ -1,9 +1,4 @@
-%%%-------------------------------------------------------------------
-%%% File    : stringprep_sup.erl
-%%% Author  : Mickael Remond <mremond@process-one.net>
-%%% Description : Supervisor for the Stringprep worker.
-%%% Created : 29 Jun 2007 by Mickael Remond <mremond@process-one.net>
-%%%
+%%%----------------------------------------------------------------------
 %%%
 %%% ejabberd, Copyright (C) 2002-2013   ProcessOne
 %%%
@@ -22,24 +17,20 @@
 %%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
 %%% 02111-1307 USA
 %%%
-%%%-------------------------------------------------------------------
+%%%----------------------------------------------------------------------
+-define(PRINT(Format, Args), io:format(Format, Args)).
 
--module(stringprep_sup).
+-define(DEBUG(Format, Args),
+	ejabberd_logger:debug_msg(?MODULE, ?LINE, Format, Args)).
 
--behaviour(supervisor).
+-define(INFO_MSG(Format, Args),
+	ejabberd_logger:info_msg(?MODULE, ?LINE, Format, Args)).
 
-%% API
--export([start_link/0]).
+-define(WARNING_MSG(Format, Args),
+	ejabberd_logger:warning_msg(?MODULE, ?LINE, Format, Args)).
 
-%% Supervisor callbacks
--export([init/1]).
+-define(ERROR_MSG(Format, Args),
+	ejabberd_logger:error_msg(?MODULE, ?LINE, Format, Args)).
 
--define(SERVER, ?MODULE).
-
-start_link() ->
-    supervisor:start_link({local, ?SERVER}, ?MODULE, []).
-
-init([]) ->
-    StringPrep = {stringprep, {stringprep, start_link, []},
-		  permanent, brutal_kill, worker, [stringprep]},
-    {ok, {{one_for_all, 10, 1}, [StringPrep]}}.
+-define(CRITICAL_MSG(Format, Args),
+	ejabberd_logger:critical_msg(?MODULE, ?LINE, Format, Args)).

mod_pubsub_ng/exmpp_pubsub.erl

@@ -273,15 +273,15 @@
       Subscription_Options :: []}
 ).
 
--type(subscription()
-  :: {Subscription_State   :: exmpp_pubsub:subscription_state(),
-      SubId                :: exmpp_pubsub:subId(),
-      Resource             :: undefined | xmpp_jid:resource_jid() | {'caps', xmpp_jid:resource_jid()},
-      Subscription_Options :: [] | pubsub_options:options_subscription()}
-%%  :: exmpp_pubsub:subscription_subscribed()
-%%   | exmpp_pubsub:subscription_pending()
-%%   | exmpp_pubsub:subscription_unconfigured()
-).
+%% -type(subscription()
+%%   :: {Subscription_State   :: exmpp_pubsub:subscription_state(),
+%%       SubId                :: exmpp_pubsub:subId(),
+%%       Resource             :: undefined | xmpp_jid:resource_jid() | {'caps', xmpp_jid:resource_jid()},
+%%       Subscription_Options :: [] | pubsub_options:options_subscription()}
+%% %%  :: exmpp_pubsub:subscription_subscribed()
+%% %%   | exmpp_pubsub:subscription_pending()
+%% %%   | exmpp_pubsub:subscription_unconfigured()
+%% ).
 
 -type(subscriptions()
     :: [exmpp_pubsub:subscription(),...]

mod_pubsub_ng/pubsub_dev.hrl

@@ -2,6 +2,7 @@
 
 %-include_lib("exmpp/include/exmpp.hrl").
 %-include_lib("exmpp/include/exmpp_jid.hrl").
+-include("logger.hrl").
 -include("ejabberd.hrl").
 -include("mod_roster.hrl").
 -include("jlib.hrl").

mod_pubsub_ng/pubsub_groups.erl

@@ -76,10 +76,10 @@
 
 -type(n0des() :: [Node::n0de(),...]).
 
--type(subscription()
-  :: {NodeIdx :: exmpp_pubsub:nodeIdx(),
-      Groups  :: roster_groups()}
-).
+%% -type(subscription()
+%%   :: {NodeIdx :: exmpp_pubsub:nodeIdx(),
+%%       Groups  :: roster_groups()}
+%% ).
 
 -type(subscriptions() :: [Subscription::subscription(),...]).