## Summary
Removes two concluded A/B experiments that didn't produce positive
results:
- **tableQuickstart**: Tested AI-powered table generation, template
selection, and assistant integration for new table creation
- **realtimeButtonVariant**: Tested hiding the realtime button or
replacing it with a triggers button
## Changes
- Delete `TableQuickstart/` folder with AI widget, templates widget, and
generation hooks
- Delete `useRealtimeExperiment` hook and remove variant-conditional
logic
- Delete `/api/ai/table-quickstart/generate-schemas` endpoint
- Remove telemetry event definitions for both experiments
- Remove local storage exposure tracking key
- Remove API endpoint from proxy whitelist
- Clean up eslint baseline references
## Testing
- [x] Tested locally - Table Editor renders correctly without experiment
widgets
- [x] TypeScript compiles without errors
- [x] No remaining references to removed experiment code
**Quick test:**
1. Navigate to Table Editor → New Tab shows only "Create a table" card
(no AI/Templates/Assistant variants)
2. Open table create panel → Realtime checkbox shows unconditionally
when realtime is enabled
## Linear
fixes GROWTH-609
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Removed Features**
* AI-powered table generation and quickstart assistance (templates, AI
widget, generation hook, templates data, and related utilities)
* Quickstart templates widget and predefined table templates
* Database triggers management interface
* Realtime experiment gating and related experiment variants
* **API & Storage**
* Hosted AI quickstart API endpoint removed
* Local storage key for quickstart exposure tracking removed
* **Telemetry**
* Quickstart- and realtime-experiment telemetry events removed
* **UI Changes**
* Simplified realtime toggle control in the table editor
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Summary
Adds session-based deduplication for experiment exposure events.
Previously, exposure events used `useRef` which reset on page refresh,
causing duplicate events. Now events dedupe by PostHog session ID using
`sessionStorage`, firing once per session even across page refreshes.
## Changes
- Add `captureExperimentExposure()` method to `PostHogClient` with
session-based dedupe
- Add `getSessionId()` method to retrieve PostHog session ID
- Create `useTrackExperimentExposure` hook for clean usage
- Migrate existing experiments to new hook:
- RLS option experiment (`/new/[slug]`)
- Realtime button experiment
- Table create generate policies experiment
## How it works
1. Event triggered → if PostHog not ready, queue to `pendingExposures[]`
2. PostHog `loaded` → flush queue through `fireExposureIfNew()`
3. `fireExposureIfNew()` checks
`sessionStorage['ph_exposed:{experimentId}']`
4. If value matches current session ID → skip (already fired)
5. If differs or missing → fire event, store session ID
## Testing
- [x] Tested locally and on preview - verified on project creation page
- [x] PostHog events sent successfully (200 responses)
- [x] Session deduplication working (no duplicate events on page refresh
or org switch)
- [x] Lint passes with 0 errors
**Quick test:**
1. Go to `/new/<org-slug>` project creation page
2. Check `sessionStorage` for `ph_exposed:project_creation_rls_option`
key
3. Refresh page - event should not fire again (same session ID)
## Linear
Resolves GROWTH-608
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* More reliable experiment exposure reporting with session-aware
deduplication, queued delivery, and consent respect to ensure events are
recorded when available.
* **Bug Fixes**
* Prevents duplicate exposure events within a session and avoids firing
exposures without a valid session.
* **Refactor**
* Consolidated disparate exposure-tracking logic into a unified
hook-based approach, simplifying tracking across the app.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
TBD
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* OS-aware modifier-key label shown in UI (⌘ on macOS, Ctrl+ on others)
* Tooltips added to operation queue actions for improved usability
* **Bug Fixes**
* Warns before applying non-primary-key sorts on large tables
* Clarified access error messages for organizations and projects
* **Refactor**
* Redesigned hotkey handling and operation-queue shortcuts
* Operation queue view toggle and save flow refined (panel auto-closes
after save)
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Bug Fixes**
* Safer error rendering across analytics and reporting with a fallback
"Unknown error".
* **Tests**
* Added unit tests covering timeseries sorting and timestamp validation.
* **Refactor**
* Standardized timeseries hook and all callers to accept a single
options object and improved nullish handling.
* **New Features**
* Exposed timeseries utilities and explicit options/result types;
exported chart data type.
* **Chores**
* Relaxed index signatures to allow dynamic metric keys.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## Context
Related to this PR
[here](https://github.com/supabase/supabase/pull/42265)
If you were to update a cell twice, then save, the value that get's
saved is the first edited value.
There's a number of changes in this PR but the main thing is just
`useOperationQueueActions` to declare `operations` outside of
`handleSave` since `snap` wouldn't trigger the re-render of that
function in the dependency array.
## Other changes
- Refactored `useOperationQueueShortcuts.ts`
- Reuse an existing `useHotKey` method to handle the event listeners
- Remove unnecessary prop drilling, call the necessary hooks within it
instead
- Simplify its calling by only calling this hook within
`SaveQueueActionBar` (removed calling from `OperationQueueSidePanel`
- Add tooltip for OperatioItem "Remove operation"
- (Unrelated) Fix Table Editor sort "Apply sort" CTA not working for
large tables when applying sort on an indexed column (e.g primary key)
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
## Release Notes
* **New Features**
* Operation queue view now toggles open and closed with a single action
* Simplified keyboard shortcuts: press **S** to save operations, **.**
to toggle the queue view
* **Bug Fixes**
* Sort operations on large tables with non-primary-key sorting now show
a confirmation warning and require explicit user approval before
applying
* **Improvements**
* Operation queue panel automatically closes after successfully saving
operations
* Enhanced UI with improved delete action feedback and refined visual
separators
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
* fix(studio): check job_run_details size in cron display
When cron.job_run_details grows too large (200k+ rows), loading the
cron jobs overview can timeout and affect other queries by pulling
excessive data into shared buffers.
This change:
- Estimates table size using pg_stat before fetching cron jobs data
- Shows a cleanup notice when the table exceeds the threshold
- Provides batched deletion using ctid ranges to avoid buffer pollution
- Allows scheduling an automated daily cleanup cron job
- Handles timeout errors gracefully with a "suspected overflow" state
The useCronJobsData hook now returns a discriminated union status that
tracks loading, estimate-error, overflow-confirmed, overflow-suspected,
and ready states, allowing the UI to respond appropriately to each case.
* fix(studio): use index when querying cron.job_run_details
cron.job_run_details is only indexed by runid, not by start_time. Change
the query to use the runid index (which gives the same result, since
runid is auto-incrementing).
* feat(studio): add mutation to update table access privileges
Adds a mutation to update table grants for `anon` and `authenticated`
roles.
* feat(studio): add data api toggles
Add toggles to the Table Editor, allowing fine-grained grants to the
anon and authenticated roles.
* fix(studio): don't show rls policies warning if table not exposed
RLS policies warning was showing in Table Editor side panel even if
table was not exposed due to no grants to anon/authenticated.
* fixup! feat(studio): add data api toggles
* fixup! feat(studio): add data api toggles
* fix(studio): revalidate rls lints when table grants are toggled
---------
Co-authored-by: Charis Lam <26616127+charislam@users.noreply.github.com>
* Add shimmering-loader CSS to ui-patterns.
* Import the shimmering-loader classes from the ui-patterns component.
* Remove ShimmeringLoader from studio.
* Migrate studio to use ui-patterns/ShimmeringLoader.
* Migrate away from using default import for ShimmeringLoader.
* Fix the css imports in docs and studio.
## Summary of changes
Buckets policies page at /project/_/storage/files/policies now uses the
paginated buckets endpoint to fetch buckets.
## Before
Used a non-paginated query.
## After
To support a paginated query, we now have:
- Infinite scroll loading behavior
- Fixed some of the buckets utilities to account for policy references
to buckets that haven't loaded yet
* Bump the deps, refactor deprecated code.
* Migrate keepPreviousData usage.
* Migrate all uses of InfiniteQuery.
* Fix refetchInterval in queries.
* Migrate all use of isLoading to isPending in mutations.
* Fix accessing location in claim-project.
* Fix a bug in duplicate query keys.
* Migrate all queries to use isPending.
* Revert "Fix accessing location in claim-project."
This reverts commit 2a07df64b5.
* Revert the rss.xml file to master.
Exporting all rows (in CSV, SQL, or JSON format) currently uses offset pagination, which can cause performance problems if the table is large. There is also a correctness problem if the table is being actively updated as the export happens, because the relative row offsets could shift between queries.
Now that composite filters are available in postgres-meta, we can change to using cursor pagination on the primary key (or any non-null unique keys) wherever possible. Where this is not possible, the user will be shown a confirmation dialog explaining the possible performance impact.
---------
Co-authored-by: Ali Waseem <waseema393@gmail.com>
Co-authored-by: Joshen Lim <joshenlimek@gmail.com>
* fix: realtime report refresh
* feat: add createRefreshHandler hook
* feat: add new refresh for storage
* feat: add new refresh for postgrest
* feat: add new refresh for edge functions
* fix: rename postgrest to data api
* feat: add db auth and api overview refresh
* fix: db refresh handler for time
* chore: change from or to nullish where required
* chore: db refresh func becomes flatmap
* chore: memoize helper function for report refresh
* chore: remove unused lines from realtime
* fix: be a bit more verbose apparently
* chore: remove unused imports
* Remove the query for temp keys. Remove the query for supabase client. Add a function which creates a supabase client with a temp key.
* Add a new query for building the endpoint URL.
* Migrate all oAuth queries and mutations to use the new function for creating a Supabase project client.
* Use the new queries/mutations in the code.
* Use query in refetchInterval for useProjectSettings.
* Replace all uses in StorageExplorer with createProjectSupabaseClient.
* feat: adds success message to link support query
* style: fixes styling
* Use existing support form components + fix styling issues + refactor and clean up
* nit
---------
Co-authored-by: Joshen Lim <joshenlimek@gmail.com>
* Refactor the iceberg queries and mutations to use getOrRefreshTemporaryApiKey.
* Fix the uses of the mutations.
* Hardcode the temp api keys queries at 60 seconds.
* When creating a s3 vectors fdw, add the target schema as a server option.
* Fix a bug in the row link, it didn't work when you middle click.
* Refactor the protected schema logic to include schemas from all fdws.
* Refactor the protected schema logic to include fdw type and name. Change the ProtectedSchemaWarning to show different messages for the 2 fdw types.
---------
Co-authored-by: Joshen Lim <joshenlimek@gmail.com>
Abstract out a hook, useConfirmOnClose, for the pattern where we show a
confirmation modal on close, conditional on whether the user has made
edits.
---------
Co-authored-by: Alaister Young <a@alaisteryoung.com>
When user logs out from the user dropdown, they're redirected to the
sign-in page via the withAuth redirect, which means that the returnTo
param is used -- but if the user _intentionally_ logged out, this might
not be the right behavior, i.e., if they want to log in to another
account. Instead, if they chose to log out, we shouldn't use the
returnTo param.
Since the /logout page already implements this behavior, I changed "Log
out" button to just route to the /logout page.
* oAuth clients index layout
* oAuth apps crud
* is public
* add user count and client secret generation and management
* scaffold oauth server settings
* improve oauth server enablement / disablement
* show cover when oAuth server is disabled
* fix update panel update button
* add site url and authorization path settings values
* move oauth server to it's own nav item
* remove unneeded oauth server settings
* let the user disactivate oauth server even after creating oauth apps
* better delete button
* cleanup
* fix typecheck
* test endpoints
* add EnableOAuth21 feature flag
* update OAUTH_SERVER_ auth config api
* load OAUTH_SERVER_ENABLED in oauth list
* Update the api.d.ts. Remove the custom versions of supa libs.
* Add query for getTemporaryAPIKey.
* Add a hook for initializing a supabase client.
* Add hooks for oAuth Server apps.
* Regenerate pnpm-lock.yaml.
* Revert updates to the platform.d.ts. Not needed for this PR.
* Migrate all code to use the new hooks.
* Try to integrate the mutations and fix some of the sheet and dialogs.
* improve default and saving states
* fix oauth app form validation
* unify components into CreateOrUpdateOAuthAppModal
* create or update oauth app
* Update the OAuth Server page.
* Remove extra files.
* Minor various fixes.
* More fixes to the creation of oauth apps.
* Bump the libs to fix a DELETE oauth app error.
* Clean up the scope feature.
* Move the feature flag in the auth layout.
* Bunch of smaller fixes.
* Regenerate pnpm-lock.
* Revert SidePanel and CardDescription changes.
* Add confirm dialog for regenerating secret.
---------
Co-authored-by: Ivan Vasilov <vasilov.ivan@gmail.com>
Pamela Chia